MULTIFUNCTIONAL.

The UFM-8 is an ultrasonic wall thickness gauge with live-time A-Scan and time-based B-scan display for fault detection.

All data is clearly displayed thanks to the high-resolution 2.4″ OLED color display.

The UFM-8 features an Echo-Echo mode for measurements through paint/coatings. In this mode, the substrate metal can be accurately measured by ignoring a paint layer or coating. The device is suitable for measuring both metallic and non-metallic materials, including plastic, steel, PVC, and glass sheets and tubes.

The data logger has a large capacity and extensive DataView software, making the thickness gauge suitable for use in industrial sectors such as manufacturing and metalworking.

  • 320 x 240 pixel color OLED screen
  • Live simultaneous color A-scan and thickness display
  • Control of gain, cancel, gate, range, delay, RF and rectification modes
  • Time-based B-Scan display Echo-Echo mode (through paint and coatings)
  • Stores 100,000 measurements and 1,000 waveforms

  • Display type: 2.4″ color OLED, 320 x 240 pixels, contrast 10,000:1
  • Operating principle: pulse echo with two-element transducers
  • Measuring range: 0.50 mm to 508 mm (0.02″ to 20.00″), depending on material, probe, and surface condition
  • Measure resolution: selectable 0.01 mm, 0.1 mm (selectable 0.001″, 0.01″)
  • Units: inch or millimeter
  • Correction modes: RF+, RF-, HALF+, HALF-, FULL
  • Display mode: normal, minimum/maximum capture, DIFF/RR%, A-Scan, B-Scan
  • V-path correction: automatic
  • Update frequency: selectable 4 Hz, 8 Hz, 16 Hz
  • Material speed range: 500 to 9999 m/s (0.0197 to 0.3937 inch/µm)
  • Languages: English
  • Alarm settings: minimum and maximum alarms. Range from 0.25mm to 508mm (0.010″ to 20.00″). Dynamic color change of the waveform upon alarm
  • Power source: 2 AA batteries
  • Operating time: approximately 40 hours
  • Instrument shutdown: selectable ALWAYS ON or AUTO OFF after 5, 10, 20 minutes of inactivity
  • Operating temperature -10°C to +50°C (+10°F to +120°F)
  • Size: 153mm X 76mm X 37mm (H
  • Weight: 280 grams including batteries

Are you only incidently in need of flowmetering equipment? With us you can rent the UFM-8 wall thickness meter per day or per week. Perform the measurements yourself, or leave it to our service engineers. We are happy to assist you with technical advice and support.

  • UFM-8 wanddiktemeter
DATASHEET
More WALL THICKNESS METERS AND PIPE MONITORING
Contact